RACING HELMET

Are you looking for best X-Large RZ-34H Snell SAH2010 Top Air Matte Black X Helmet by Zamp ?

X-Large RZ-34H Snell SAH2010 Top Air Matte Black X Helmet by Zamp

Are you looking for best Z121740E12 Sabelt TOUCH E -glove ?

Z121740E12 Sabelt TOUCH E -glove

Product Description
Preformed. Nomex knitted fabric paired with suede on the palm. External seams Especially designed for rally competitions. FIA 8856-2000 approved. MADE IN ITALY. Red

Are you looking for best G-Force 3025XSMBK Pro Vintage Black X-Small SA10 Full Face Racing Helmet ?

G-Force 3025XSMBK Pro Vintage Black X-Small SA10 Full Face Racing Helmet

Product Description
This racing gear Pro Vintage is the most eye catching, SNELL SA2005 rated helmet. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon and Kevlar composite blend. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Pro Vintage's shell. This helmet is HANS friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125 inch thick, ProFit Shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. On the inside, G-Force Racing Gear has produced the most user friendly and comfortable helmet. The heart of the Eliminator helmet is the G-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. The chin strap in the Eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable Kevlar webbing.

Are you looking for best X-Large RZ-34H Snell SAH2010 Matte Black XLG 62cm Helmet by Zamp ?

X-Large RZ-34H Snell SAH2010 Matte Black XLG 62cm Helmet by Zamp

Are you looking for best Longacre 73510 DIGITAL VALVE SPRING ?

Longacre 73510 DIGITAL VALVE SPRING

Product Description
Spring pressure from 0 to 1400 lbs. by 1 lb. incrementsSpring travel from 0.000" to 4.000" in .001" incrementsPositive stop to make repeated spring checks at the same height1/10th of 1% accuracy on both spring pressure and travelRechargable battery with charger - run on battery or 110 voltCheck springs with or without retainerSpring travel can be zeroed at any pointExtra long arm to make testing high pressure springs easierQuick and easy to use

Are you looking for best Simpson 4200012 Bandit Black Small SA10 Helmet ?

Simpson 4200012 Bandit Black Small SA10 Helmet

Product Description
SIMPSON SAFETY 4200012 Bandit Helmet Small Black SA10

Are you looking for best G-Force SRS1 SRS-1 Helmet Restraint ?

G-Force SRS1 SRS-1 Helmet Restraint

Product Description
The Helmet Restraint System is designed as a complete system to be used in concert with an approved helmet. Helps keep those neck muscles from tiring on long circle track races. Device has been sled tested and race-proven to work. Device only works for full face, G-Force "FORCE" and "Pro Force" helmets.

Are you looking for best Simpson 97043 Shock Doctor Eject Helmet System ?

Simpson 97043 Shock Doctor Eject Helmet System

Product Description
SIMPSON SAFETY 97043 Shock Doctor Eject Helmet System

Are you looking for best G-Force 3023LRGWH Pro Eliminator White Large SA10 Full Face Racing Helmet ?

G-Force 3023LRGWH Pro Eliminator White Large SA10 Full Face Racing Helmet

Product Description
A sleek new design from G-Force Racing Gear, the Pro Eliminator has provided a new benchmark in quality, functionality and style. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon, and Kevlar composite blend. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Pro Eliminator's shell. This helmet is HANS Friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125 inch thick, ProFit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The ProFit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The heart of the Pro Eliminator helmet is the G-78 impact liner made to meet and exceed all Snell and SFI specs. It is covered by a soft knit, hypoallergenic, padded CoolTec, flame retardant liner for comfort and fit. The chin strap in the Pro Eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant Kevlar webbing.

Are you looking for best Simpson 4607381 Speedway Vudo 7-3/8" SA10 Helmet ?

Simpson 4607381 Speedway Vudo 7-3/8" SA10 Helmet

Product Description
SIMPSON SAFETY 4607381 Speedway Vudo Helmet 7-3/8 SA10

Are you looking for best Medium RZ-34H Snell SAH2010 White MED 58cm Helmet by Zamp ?

Medium RZ-34H Snell SAH2010 White MED 58cm Helmet by Zamp

Are you looking for best G-Force 3025XLGBK Pro Vintage Black X-Large SA10 Full Face Racing Helmet ?

G-Force 3025XLGBK Pro Vintage Black X-Large SA10 Full Face Racing Helmet

Product Description
This racing gear Pro Vintage is the most eye catching, SNELL SA2005 rated helmet. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon and Kevlar composite blend. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Pro Vintage's shell. This helmet is HANS friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125 inch thick, ProFit Shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. On the inside, G-Force Racing Gear has produced the most user friendly and comfortable helmet. The heart of the Eliminator helmet is the G-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. The chin strap in the Eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable Kevlar webbing.

Are you looking for best G-Force 3027XLGWH Side Draft White X-Large SA10 Full Face Racing Helmet ?

G-Force 3027XLGWH Side Draft White X-Large SA10 Full Face Racing Helmet

Product Description
The G-Force Racing Gear Modified Helmet is the enclosed cockpit racers dream. Taken from the well received Hybrid design, the Modified helmet continues that tradition. The Modified helmet is a combination of the new Pro Eliminator full face and the Pro Phenom open face helmets. Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon Kevlar composite blend. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Modified's shell. This helmet is HANS friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The heart of the Modified helmet is the G-78 impact liner made to meet and exceed all Snell and SFI specs. The G-78 impact liner is covered by a soft knit, padded CoolTec flame retardant liner for comfort, fit and functionality. The chin strap in the Modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant Kevlar webbing. The Modified helmet carries the Snell SA2010 rating.

Are you looking for best Zamp H73303FM RZ-34 Full Face Helmet, Matte Black, Medium ?

Zamp H73303FM RZ-34 Full Face Helmet, Matte Black, Medium

Are you looking for best Simpson 483002C Carbon Devil Ray Medium SA2010 Helmet ?

Simpson 483002C Carbon Devil Ray Medium SA2010 Helmet

Are you looking for best XX-Large RZ-34H Snell SAH2010 Top Air Matte Black X Helmet by Zamp ?

XX-Large RZ-34H Snell SAH2010 Top Air Matte Black X Helmet by Zamp

Are you looking for best G-Force 3026XXLWH Modified White XX-Large SA10 Full Face Racing Helmet ?

G-Force 3026XXLWH Modified White XX-Large SA10 Full Face Racing Helmet

Product Description
The G-Force Racing Gear Modified Helmet is the enclosed cockpit racers dream. Taken from the well received Hybrid design, the Modified helmet continues that tradition. The Modified helmet is a combination of the new Pro Eliminator full face and the Pro Phenom open face helmets. Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon Kevlar composite blend. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Modified's shell. This helmet is HANS friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The heart of the Modified helmet is the G-78 impact liner made to meet and exceed all Snell and SFI specs. The G-78 impact liner is covered by a soft knit, padded CoolTec flame retardant liner for comfort, fit and functionality. The chin strap in the Modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant Kevlar webbing. The Modified helmet carries the Snell SA2010 rating.

Are you looking for best Impact 14099309 White Small Charger Helmet ?

Impact 14099309 White Small Charger Helmet

Product Description
IMPACT RACING 14099309 Charger Helmet Small White SA2010

Are you looking for best Simpson 1011-11 Shark/Vudo Smoke SA10 Shield ?

Simpson 1011-11 Shark/Vudo Smoke SA10 Shield

Product Description
Simpson 1011-11 SMOKED SHEILD SHARK/VUDO

Are you looking for best HJC Helmets 6WXL10 Si-12 White X-Large SA2010 Approved Auto Racing Helmet ?

HJC Helmets 6WXL10 Si-12 White X-Large SA2010 Approved Auto Racing Helmet

Product Description
Introducing the all-new Super Lite Si-12 from HJC. HJC's innovative shell technology allows them to build a fully equipped racing helmet that feels as light as feather, yet provides all the features and comfort you demand. Featuring an advanced super lite composite weave shell and super lightweight with superior fit and comfort using advanced CAD technology. The Advanced Channeling Ventilation System features full front to back airflow, flushing heat and humidity up and out. Additional features include a polycarbonate anti-fog shield and optically-superior 3D design provides 95 percent UV protection and anti-scratch coating, a fire resistant comfort-carbon interior is moisture-wicking and comfortable, optional R.S.T. shields are available in silver and blue, HANS device compatible and pre-drilled for posts, durable, lightweight titanium top front vent and a deluxe helmet storage bag is included.

Are you looking for best HJC Helmets 4CL10 HX-10 II Large Carbon Fiber SA2010 Approved Auto Racing Helmet ?

HJC Helmets 4CL10 HX-10 II Large Carbon Fiber SA2010 Approved Auto Racing Helmet

Product Description
This Snell SA2010 approved racing helmet features an advanced super-lite composite weave shell, low profile top forced air with multi-directional air hose fitting and channeled ventilation system for air circulation. Additional features include pre-drilled for a head and neck restraint, fire resistant moisture-wicking comfort-carbon interior and polycarbonate anti-fog shield with tear-off posts. Optional shields available in silver, blue, amber and dark smoke. Helmet bag is included.

Are you looking for best Simpson 4127381 Sidewinder Voyager 7-3/8" SA10 Helmet ?

Simpson 4127381 Sidewinder Voyager 7-3/8" SA10 Helmet

Product Description
SIMPSON SAFETY 4127381 Sidewindr Voyager Helmet 7-3/8 SA10

Are you looking for best Allstar ALL13020 Remote Mount Helmet Air Blower System Kit ?

Allstar ALL13020 Remote Mount Helmet Air Blower System Kit

Product Description
Allstar Remote Mount Helmet Air Blower System Kit has a system kit that directs filtered, forced air to the drivers helmet for added comfort and safety. The motor assembly has a bracket for easy mounting to either the chassis or seat back. The 4 foot helmet hose connects to most helmet fresh air intakes and the 7 foot extension lead can be easily connected to a 12 volt source. It is backed by a 90-day limited factory warranty. It is sold as a complete kit.

Are you looking for best HJC Helmets 2WM10 AR-10 II White Medium SA2010 Approved Auto Racing Helmet ?

HJC Helmets 2WM10 AR-10 II White Medium SA2010 Approved Auto Racing Helmet

Product Description
This Snell SA2010 approved racing helmet features an advanced fiberglass composite weave shell. Lightweight, superior fit and comfort using advanced CAD technology. The Advanced Channeling Ventilation System features full front to back airflow, flushing heat and humidity up and out. Additional features include plush, removable and washable nomex interior, polycarbonate anti-fog shield with tear-off posts, improved front ventilation and double D-ring retention system. Optional shields available in silver, blue, amber and dark smoke. The AR series featuring fiberglass shell constructions, has been HJC's most popular series due to superb aerodynamics, excellent fit, and exceptional comfort.

Are you looking for best Simpson 4100021 Voyager Medium Helmet ?

Simpson 4100021 Voyager Medium Helmet

Product Description
SIMPSON SAFETY 4100021 Helmet Voyager Medium

Are you looking for best G-Force 3028SMLBK Pro CFG Black Small SA10 Full Face Racing Helmet ?

G-Force 3028SMLBK Pro CFG Black Small SA10 Full Face Racing Helmet

Product Description
G-Force Racing Gear is proud to bring you the new CFG Carbon Fiber Snell SA2010 Helmet. The all new model is constructed of a carbon fiber shell, multi-density liner made with conehead technology and covered with a soft knit, flame retardant liner. The shell is capped with striking centerline graphic which will help separate you from the pack. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125 inch thick, ProFit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The ProFit Shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design.

Are you looking for best Simpson 4517001 Speedway RX 7" SA10 Helmet ?

Simpson 4517001 Speedway RX 7" SA10 Helmet

Product Description
SIMPSON SAFETY 4517001 Speedway RX Helmet 7 SA10

Are you looking for best Simpson 4267188 X Bandit Black 7-1/8" SA10 Helmet ?

Simpson 4267188 X Bandit Black 7-1/8" SA10 Helmet

Product Description
SIMPSON SAFETY 4267188 X Bandit Helmet 7-1/8 Flat Black SA10

Are you looking for best Impact 14099510 Black Large Charger Helmet ?

Impact 14099510 Black Large Charger Helmet

Product Description
IMPACT RACING 14099510 Charger Helmet Large Black SA2010

Are you looking for best G-Force 3025LRGBK Pro Vintage Black Large SA10 Full Face Racing Helmet ?

G-Force 3025LRGBK Pro Vintage Black Large SA10 Full Face Racing Helmet

Product Description
This racing gear Pro Vintage is the most eye catching, SNELL SA2005 rated helmet. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon and Kevlar composite blend. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Pro Vintage's shell. This helmet is HANS friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125 inch thick, ProFit Shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. On the inside, G-Force Racing Gear has produced the most user friendly and comfortable helmet. The heart of the Eliminator helmet is the G-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. The chin strap in the Eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable Kevlar webbing.

Are you looking for best Simpson 4707588 Speedway Shark Black 7-5/8" SA2010 Helmet ?

Simpson 4707588 Speedway Shark Black 7-5/8" SA2010 Helmet

Are you looking for best G-Force 3025XXLWH Pro Vintage White XX-Large SA10 Full Face Racing Helmet ?

G-Force 3025XXLWH Pro Vintage White XX-Large SA10 Full Face Racing Helmet

Product Description
This racing gear Pro Vintage is the most eye catching, SNELL SA2005 rated helmet. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon and Kevlar composite blend. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Pro Vintage's shell. This helmet is HANS friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125 inch thick, ProFit Shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. On the inside, G-Force Racing Gear has produced the most user friendly and comfortable helmet. The heart of the Eliminator helmet is the G-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. The chin strap in the Eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable Kevlar webbing.

Are you looking for best Simpson 4200042 Bandit Black X-Large SA10 Helmet ?

Simpson 4200042 Bandit Black X-Large SA10 Helmet

Product Description
SIMPSON SAFETY 4200042 Bandit Helmet X-Large Black SA10

Are you looking for best G-Force 4160XNT COOLTEC UNDERWEAR TOP ?

G-Force 4160XNT COOLTEC UNDERWEAR TOP

Product Description
G-Force 4160XNT COOLTEC UNDERWEAR TOP.

Are you looking for best G-Force 3025SMLMB Pro Vintage Matte Black Small SA10 Full Face Racing Helmet ?

G-Force 3025SMLMB Pro Vintage Matte Black Small SA10 Full Face Racing Helmet

Product Description
This racing gear Pro Vintage is the most eye catching, SNELL SA2005 rated helmet. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon and Kevlar composite blend. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Pro Vintage's shell. This helmet is HANS friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125 inch thick, ProFit Shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. On the inside, G-Force Racing Gear has produced the most user friendly and comfortable helmet. The heart of the Eliminator helmet is the G-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. The chin strap in the Eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable Kevlar webbing.

Are you looking for best G-Force 3023MEDBK Pro Eliminator Black Medium SA10 Full Face Racing Helmet ?

G-Force 3023MEDBK Pro Eliminator Black Medium SA10 Full Face Racing Helmet

Product Description
A sleek new design from G-Force Racing Gear, the Pro Eliminator has provided a new benchmark in quality, functionality and style. The outer contact shell is made from a low density, lightweight Z38 fiberglass, carbon, and Kevlar composite blend. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the Pro Eliminator's shell. This helmet is HANS Friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. Reinforced mounting points for the HANS Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. An optically correct, .125 inch thick, ProFit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The ProFit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The heart of the Pro Eliminator helmet is the G-78 impact liner made to meet and exceed all Snell and SFI specs. It is covered by a soft knit, hypoallergenic, padded CoolTec, flame retardant liner for comfort and fit. The chin strap in the Pro Eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant Kevlar webbing.

Are you looking for best Simpson 1012-11 Shark/Vudo Amber SA10 Shield ?

Simpson 1012-11 Shark/Vudo Amber SA10 Shield

Product Description
Simpson 1012-11 AMBER SHIELD SHARK/VUDO

Are you looking for best Simpson Racing 88603A Shield-Amber/BlueBlocker Super Shark/Invader/Valor Helmet ?

Simpson Racing 88603A Shield-Amber/BlueBlocker Super Shark/Invader/Valor Helmet

Are you looking for best Simpson Racing 1100021 Voyager SNELL 05 White Medium Fire-Retardant Helmet ?

Simpson Racing 1100021 Voyager SNELL 05 White Medium Fire-Retardant Helmet

Are you looking for best Simpson 4200051 Bandit XX-Large SA10 Helmet ?

Simpson 4200051 Bandit XX-Large SA10 Helmet

Product Description
SIMPSON SAFETY 4200051 Bandit Helmet XX-Large SA10

Are you looking for best Simpson 4607581 Speedway Vudo 7-5/8" SA10 Helmet ?

Simpson 4607581 Speedway Vudo 7-5/8" SA10 Helmet

Product Description
SIMPSON SAFETY 4607581 Speedway Vudo Helmet 7-5/8 SA10

Are you looking for best OMP Racing OMP-NA/1864/N Rally helmet box black ?

OMP Racing OMP-NA/1864/N Rally helmet box black

Product Description
Rally helmet box with wide side pockets and velvet like material lining.

Are you looking for best Simpson 84300A Stingray Clear Shield for Devil Ray Helmet ?

Simpson 84300A Stingray Clear Shield for Devil Ray Helmet

Product Description
Simpson 84300A SHIELD CLEAR STINGRAY.